"I worked with George on a multi-year project of great complexity. What was delivered in the final work product was world class engineering, and very well executed. George combined expertise in hardware, firmware, and support software development, producing not only the main deliverable but important support software that allowed for integration of the product into a manufacturing environment. George was professional, knowledgeable, and had high standards for work output."
- Jason C., 3DMed Inc.
"George is an extremely talented engineer. When I found him my project was a complete mess. The PCB design was completely flawed and the firmware was chalked full of errors. Despite the condition of the project, George took it on with open arms. Although he is an EE, he was able to provide incredibly valuable advice on the mechanical design of my product, he took over the firmware design, and assisted with setting me up with a trusted manufacturer for the PCB. George is by far the most valuable member of my team since he started working with me over 3 years ago. I am now moving into production for the product with full confidence in the PCB and firmware design. Thank you for all of your help, George!"
- Joel P.
"George is a very skilled and professional engineer. He understood our requirements perfectly and recommended the most suitable solution. He was responsible for the complete design of PCB, firmware and PC software for our project and he excelled in every area, producing a reliable and cost effective product. He also assisted us in moving the product to production, recommending best suppliers and providing technical support. George is easy to work with and very cooperative, I would highly recommend him to anyone."
- Marco P.
"George helped me bring a design I had developed on a breadboard to full production. It was pretty complex and included NFC as well as a microprocessor + WiFi module. George helped me prototype and did wireless testing so I could be sure the product was solid. George built a very tolerant circuit with a lot of best practices which really helped when I needed to diagnose issues with my firmware. He introduced me to a manufacturer in China and facilitated the manufacturing work. I highly, highly recommend George and will definitely contract him in the future."
- John K.
"George has worked within our team on many projects for the last three years. Originally hired to program a AVR micro controller, George's role expanded to full PCB design, Custom Bluetooth applications built upon the nRF5x series, CAN bus hardware and Raspberry Pi Compute Module integration. He has engaged PCB production companies and industrial designers on our behalf, both of which are well respected. He is an invaluable member of our team. I would highly recommend him for any project you may have."
- Nicholas U.
"Superb, top-notch. George went above and beyond the project requirements. He is a true professional: experienced, insightful, resourceful, and diligent. He exceeded expectations, and our expectations were high. He also got the job done for fewer hours than expected, so we were billed less than we expected."
- Andy J.
"Very professional engineer, highly recommended. Pricier than others, but worth every penny; working with George was an absolutely flawless experience."
- Catalin T.
"EXPERT! If you need something done WELL and actually work then George is the guy to hire! Other engineers told me that it was not possible to make what I wanted to make and George actually created it - he squeezed every potential out of ultrasonic sensor by selecting right chips and components. Pretty impressive."
- Dmitri S.
"George designed a series of water-sensing probes for me for an art project. He gave lots of advice on the approach and design of the project, and managed to create the prototypes very quickly. He is a very clear and responsive communicator, and I would highly recommend working with him."
- Jonathan C.
"The best Electronic Engineer to work with. Very knowledgeable and experienced. Very thorough and pays attention to details. Excellent communication and knowledge transfer."
- Louis M.
"George brought experience and efficiency to this project. He was quickly up to speed on our needs, communicated effectively and efficiently, and suggested/implemented improvements while delivering the hardware updates that we requested. George is highly capable and easy to work with. We look forward to continue working with him."
- Alicia C.
"George did a great job on this PCB re-design. The work was done in a timely manner and he was responsive and helpful throughout the process."
- Mike C.
"George handled both the electronics and firmware for our project and did a great job. Having one person looking at the whole system made things much easier, especially when changes on the hardware side affected the software and vice versa. Very knowledgeable and straightforward to work with."
- David B.
"George has been a life saver for us in developing and debugging our product. Extremely knowledgeable and fast to find solutions in the world of PCB layout/design and Firmware. If we ever build an electronic device again, we will consult with George. Highest recommendations."
- Leo K.
"If you have a complicated project to embark on, George is the freelancer you should consider working with. He has strong technical knowledge across several aspects of hardware development. You will be in good hands even if you have no technical expertise."
- Arun S.
"George is a very skilled engineer that we have used for several years with success."
- Allan K.
"I have received nothing but the best service and level of work from George. Even my first prototype exceeded my expectations when he sent it to me in the mail. Again, this is something you should expect from a good Engineer like he is."
- Joel N.
"George did a fantastic job!! George knew how to solve all the challenges a complex job like this one presents. I will definitely work with him again."
- Sam G.
"Brilliant help from George on our project. Prompt response and a great person to deal with. Hoping to work with him on our future projects."
- Ahmed K.
"George worked with us on the motor control side of our project and clearly knew what he was doing. We had quite a few issues to work through with the FOC control and power stage and he was able to get to the root of them quickly. He also explained the reasoning behind the changes rather than just giving us a solution."
- Marcus W.
"We started with a fairly rough idea of what we wanted and George took care of the electronics development from there. The resulting design worked very well and we had no major EMC problems when it went for testing, which was a big concern for us at the start. Very pleased with the result."
- Sarah L.
"We contacted George after having problems with an existing prototype. He spent some time going through the design and found that most of our trouble was coming from the power supply section. After making the changes the board became much more reliable and we have since used the design for production."
- Robert T.
"George helped us with the RF part of our product, including the PCB antenna and matching. The final antenna performed better than the solution we were using before and also allowed us to simplify the product mechanically. We were particularly happy with the amount of actual measurement and testing he did rather than relying only on simulation."
- Yuki M.
"We needed someone who understood the electronics as well as the embedded software and George was a very good fit. The firmware was well structured and he had no problem working with the hardware and protocols we already had. He also picked up on a number of things we had overlooked."
- Peter H.
"George worked with us getting our prototype ready for manufacture. A lot of the changes he suggested were quite small things but they made the board easier and cheaper to build. He also designed a simple test fixture for production which has been very useful for us."
- Michael R.
"What I liked most was that George would tell us when he thought something in our original plan wasn't a good idea. He pointed out several potential problems before we committed to the design and gave us sensible alternatives. Communication was always clear and there were no nasty surprises later."
- Emma S.
"We had been struggling with noise on a low-level sensor circuit and George redesigned the analogue front end for us. The improvement was very noticeable and we were finally able to get the measurements we needed consistently. He obviously has a lot of experience with this type of circuit."
- Carlos M.
"George reviewed our schematic before we sent the next board revision out. He found a few things we had missed, including some that probably would have caused us trouble later. The comments were clear and practical and we were able to implement most of them immediately."
- Thomas B.
"We've used George for several projects over the last few years and keep coming back to him. He knows our products well now and we trust his judgement on the electronics side. It's also reassuring to know that when something unexpected comes up he will stay with it until we understand what is happening."
- Jennifer K.
